Usage | for Industrial Machinery |
Brand | Delta |
Input Phase | 3 Phase |
Product specific application | Any |
Country of Origin | Made in India |
Kgf CM | 7.1~12.2, 182.4~122.6 |
Analog Power Source | Power Supply For Analog Frequency Setting. Maximum Output : +12V, 100mA, -12V, 100mA |
Built-In RS485 Termina | C+, C- |
External Option | Built-in |
Forward Run | Forward Run When Closed And Stopped When Open |
External MotorThermal Detection | NT (~30kW) |
Analog Output | S0, S1 |
Contact | A1~4, C1~4 Digital |
Drive Capacity(KW) | 315 ~ 375(KW) |
Fault Reset | Used For Fault Reset |
Analog Input (Voltage + Current)/Output | (1+1) points /4 points |
Motor Rating(KW) | 12 KW |
Digital Input/Output | 8 points / 5 points |
Reverse Run | Reverse run when closed and stopped when open |
Sequence Common | Common Terminal For NPN Contact |
Voltage | 380~480V |
Grounding Wire Sizes, KCMIL (mm) | 400 (200) |
Power | 5 HP |
Usage | for Industrial Machinery |
Brand | INVT |
Model Name/Number | GD200/GD100/GD20 |
Input Voltage | 200V- 440V AC |
Input Phase | 3 - Phase |
Minimum Order Quantity | 1 Piece |
Phase | Three phase |
Power | 3 HP |
Usage | for Industrial Machinery |
Brand | Delta |
Model Name/Number | VFD |
Input Voltage | 460V |
Input Phase | 3 - Phase |
Overload Capacity | HD : 150% for 1Min; ND: 110% for 1Min |
Operational Functions | PID Control, Up-Down Operation, 3-Wiring Operation, Draw Mode |
Rated Current | 0.8-11 |
Accel/Decel Time | 0.0 to 6000 Sec |
PCB Protection | Conformal Coating Complying To IEC 60721-3-3 Class 3C2 |
Relative Humidity | Below Relative Humidity 90% RH (No Condensation) |
Operation Mode | Keypad / Terminal / Communication Operation |
Alarm | Stall Prevention, Overload |
Max. Output Frequency | 400 [Hz]3 |
Starting Torque | 150% at 3 Hz in V/F |
Storage Temperature | -20 DegreeC ~ 65 DegreeC |
Motor Rating | 0.1 kW |
Applicable Motor (HD) | 0.3-4.2 |
Rated Voltage [V] | Single-Phase 200 ~ 240 VAC (-15% ~ +10%) |
V/F Pattern | Linear, Squared, User V/F |
Cooling Type | Natural Cooling And Forced Cooling |
Frequency Precision Setting | Digital command: 0.01Hz Analog command: 0.03Hz (Max. frequency: 50Hz) |
Braking Chopper | Built-In |
Momentary Power Loss | Below 16 msec: Continuous Operation Above 16 msec: Auto Restarting. |
Input Ratings | 1.4-24 |
Keypad | LED (Non detachable) |
Frequency Control Range | 0.01 to 400Hz for V/F , 0 to 120Hz for Sensorless Vector Control |
Output Frequency Resolution | 0.01Hz |
Torque Compensation | Manual/Auto Torque Compensation |
Protection Degree | Opening (IP20) |
Atmospheric Pressure | 70~106 kPa |
Max Input Voltage | Single-Phase 200 ~ 240 VAC (-15% ~ +10%)Three-Phase 380 ~ 480 VAC (-15% ~ +10%) |
Control Method | V/F Control, Sensorless Vector Control, Slip Compensation |
Altitude/Vibration | Below 1000m, 5.9m/sec2 (0.6G) |
Installation Environment | No Corrosive Air, Combustible Gas, Oil Mist, Etc. |
Global Compliance | CE, UL, RoHS |
Applicable Motor (HP) | 1/8-3 |
Overload Capacity | HD : 150%/ 1Min; ND: 110%/ 1Min |
Applicable Motor (ND) | 0.25-15 |
Max. Output Voltage | Three-Phase 200 ~ 240V4 |
Input Ratings(HD) | 0.7-28.6 |
Applicable Motor (HD) | 0.12-10 |
Frequency Precision Setting | Digital Command: 0.01Hz Analog Command: 0.05Hz (Max. Frequency: 50Hz |
Atmospheric Pressure | 70~106 kPa |
Motor Rating | 0.1 kW |
Rated Current | 0.8-32.0 |
Cooling Type | Natural Cooling And Forced Cooling |
Protection Degree | Opening (IP 20) |
Operation Mode | Keypad / Terminal / Communication operation |
Control Type | V/F Control, Sensorless Vector Control, Slip Compensation |
V/F Pattern | Linear, Squared, User V/F |
Analog Input | Signal Input: 0-10V, 0-20mA (programmable) |
Rated Capacity(KVA) | 0.3-12.2 |
Max. Output Frequency | 400 [Hz]3 |
Storage Temperature | -20 DegreeC ~ 65 Degree C |
Operational Functions | PID Control, Up-Down Operation, 3-Wiring Operation, Draw Mode |
Max. Brake Torque | 20% |
Rated Frequency | 50 ~ 60 [Hz] (5%) |
Relative Humidity | Below Relative Humidity 90% RH (No Condensation) |
Rated Voltage [V] | Three Phase 200 ~ 240 VAC (-15% ~ +10%) |
Altitude/Vibration | Below 1000m, 5.9/sec(0.6G) |
Torque Compensation | Manual/Auto Torque Compensation |
Time/%ED | 150%2) When Using Optional DB Resistor |
Installation Environmen | No Corrosive Air, Combustible Gas, Oil Mist, Etc. |
Overload Capacity | HD : 150% for 1min; ND: 110% for 1min |
PCB Protection | Conformal Coating Complying to IEC 60721-3-3 class 3C2 |
Rated Frequency | 50/60Hz (-5/+5%) |
Protection Degree | IP20 till 11kW & IP00 till 450kW |
Atmospheric Pressure | 70~106 kPa |
Pulse Input | 1 Input (0 to 30kHz) |
Output Frequency Resolution | 0.01Hz below 100Hz,0.1Hz over 100Hz |
Trip Information | Max. 5 Faults are saved |
Max Output Frequency | 0 to 120Hz |
Max Output Voltage | Proportional to Input Voltage |
Installation Environment | Pollution degree 2,No Corrosive Gas,Combustible Gas,Oil Mist,or Dust |
Global Compliance | CE,UL,RoHS |
Analog Output | 2 (0 to 10Vdc) |
Keypad | Detachable LCD |
Control Method | V/F,Sensorless Vector,Slip Compensation,Easy Start Selectable |
Alarm | Stall Prevention,Overload Alarm,Thermal Sensor Fault |
Analog Input | 1 (4 to 20mA) & 1 (0 to 10Vdc) |
Digital Output | 4 (R) (Programmable NO/NC) + 1 (TR) |
Features | DC Braking,Reverse Rotation Prevention,Auto Restart,Inverter By-Pass,Auto-Tuning,PID Control. |
Frequency Precision Setting | Digital Reference: 0.01 Hz (Below 100 Hz),0.1 Hz (Over 100 Hz)Analog Reference: 0.01 Hz / 60 Hz |
V/F Pattern | Linear,squared,user V/F |
Starting Torque | 200% at 0.5Hz for Sensorless Control |
Accel/Decel Time | 0.0 to 6000 Sec |
Pulse Output | 1 Output (0 to 30kHz) |
NTC/PTC Input | 1 |
Storage Temperature | -20 DegreeC ~ 65 Degree C |
Digital Input | 8 (Programmable NPN/PNP) |
Max Input Voltage | Three-Phase 380 ~ 480 VAC (-15% ~ +10%) |
Frequency Control Range | 0.01 to 120Hz |
Faults | Over Voltage,Low Voltage,Over Current,Ground Fault,Inverter Overheat,Motor Overheat. |
Ambient Temperature | HD operation: - 10 ~ 50 DegreeC (no freezing) |
Relative Humidity | Below relative humidity 90% RH (no condensation) |
Altitude/Vibration | Below 1000m,5.9m/sec2 (0.6G) |
DC Reactor | Built-in 22 to 280kW (ND) |
Overload Capacity | HD: 150% for 1 Minute, ND: 120% For 1 Minute |
Accel/Decel Time | 0.0 to 6000 Sec |
Altitude, Vibration | Below 1,000m, below 5.9m/sec2 (0.6G) |
Torque Boost | Manual/Automatic Torque Boost |
Safety I/P | 2 |
Analog Input | V1:- 10~10V, V2:- 0~10V/4~20mA Selectable |
Pulse Train | 0Hz~32kHz, Low level: 0~0.8V, High level: 3.5~12V |
DC Reactor | External [option] |
PCB Protection | Conformal Coating Complying to IEC 60721-3-3 Class 3C2 |
Protection Degree | IP20/UL Open (Default), UL Enclosed Type 1 (Option), IP66/NEMA 4X (Option) |
Analog Output | 1 (4-20mA / 0 to 10Vdc) till 22kW & 1 (4-20mA) + 1 (0 to 10Vdc) above 22kW |
Storage Temperature | -20 ~ 65 degrees C |
HeavyDuty(HP) | 0.5-3.0 |
Operation Mode | Keypad / Terminal / Communication Option Selectable |
Frequency [Hz] | 0~400Hz (IM Sensorless : 0~120[Hz]) |
Humidity | Relative Humidity Below 90% RH (No Dew Formation) |
Display | LED [LCD optional] |
Braking Torque | Continuous Regeneration Torque 20% (150% With DBR) |
Output Frequency Resolution | 0.01Hz |
Forced Cooling Type | 0.8-15 kW 230V/1.5-75 kW 415V |
Features | Multi Keypad, Peer to Peer Communication to share I/O's, User Sequence, Inbuilt PID |
Control Method | V/f, Slip Compensation, Sensorless Vector Contro |
Location | No Corrosive Gas, Flammable Gas, Oil Mist Etc. Indoors (Pollution Degree 2 Environment) |
Voltage [V] | 3-phase 200~240V |
Braking Chopper | Built-In Upto 30 kW(ND) |
Braking Unit | Built-in |
Motor Rating(Normal Duty) | 0.75 kW-90 kW |
Capacity Heavy Duty [HD] | 1.0-4.2 |
Rated Current | 2.5-11.0 |
Keypad | Built-In LED Till 30 kW(ND) & Above 30kW Standard Detachable LCD |
Starting Torque | 200% At 0.5Hz For Sensorless Control & 150% At 3 Hz For V/F |
Communication | Built-in RS485 Modbus RTU.Optional: CANopen, Profibus DP, Modbus TCP, Ethernet I/P |
V/F Pattern | Linear, Squared, User V/F |
Frequency Setting Resolution | Digital command: 0.01Hz / Analog Command: 0.05Hz (Maximum Frequency: 50Hz) |