Speed | 1200 RPM |
Type | Unipolar Stepper Motor |
Number of Phase | 1 |
Application | Drone |
Step Angle | 0.9 Degree |
Model Name/Number | Nema 23 |
Country of Origin | Made in India |
Power | 75 KW |
Type of Induction Motors | Three Phase Induction Motors |
IP Rating | IP44 |
Pole | 2 |
Efficiency | IE2 |
Type | High Voltage Motor |
Power | 0.55 KW |
Type of Induction Motors | Single Phase Induction Motors |
IP Rating | IP23 |
Pole | 2 |
Efficiency | IE2 |
Type | High Voltage Motor |
Usage/Application | Milling Machine |
Material | Aluminium |
Display Row | 3 |
Brand | Electronica |
Operating Temperature | 0 Degree C To 50 Degree C |
Relative Humidity | 20% To 85% Non-Condensing |
Power Consumption | 15W SMPS |
Encoder Input | RS422 |
Exit Without Saving | Exit From Setup Without Saving Changes |
Dimensions (mm) | 192 mm X 290 mm X 76 mm Height X Width X Depth |
Mains Supply | 90 VAC to 265 VAC (50 / 60 Hz) |
Fuse Rating | 800mASlow Blow 20mm |
Encoder Connector Type | 9-Pin D-Type Female |
Save & Exit | To Save The Changes And Exit From Setup |
Key Beep Enable | To Enable Or Disable Keyboard Beep ON Or OFF |
Standard Compliance | EN61326RoHS |
Net Weight | Approx1.5 Kg |
Encoder Resolution Supported | 0.1/0.2/0.5/1/2/5/10/20/50 Micron |
Serial Communication | Enables The User To Set The Serial Communications Parameters. |
Sleep Mode Time (min) | Defines Sleep Time Interval In Minutes (5 to 120) |
Storage Temperature | -20 Degree C to +70 Degree C |
Usage/Application | Milling Machine |
Material | Aluminium |
Display Row | 3 |
Brand | Sino |
Power Source | Electricity |
Relative Humidity | <90%(20+-5 Degree C) |
Weight | 3.2 kg |
Model Name/Number | SDS6-2V |
Frequency multiplication | 4X |
Allowable Input Signal | TTL Square Wave |
Shape | Square |
Power Consumption | 25VA |
Operation Keyboard | Sealed Diaphragm Touch Keys |
Storage Temperature | -30 Degree C~70 Degree C |
Working Temperature | 0 Degree C~45 Degree C |
Number Of Coordinates | 2 Coordinates, 3 Coordinates |
Power Voltage Selection | AC 80V~260V +-15% 50 Hz~60 Hz |
Usage/Application | Milling Machine |
Brand | Electronica |
Frequency | 50 Hz |
Power Source | Electricity |
Voltage V | 10-30 VDC |
Shape | Square |
Axis | 2 Axis |
Color | Black |
Length | 370-1020 mm |
Model Number/Name | EL400-S1S2 |
Cross | 220-470 mm |
Stroke | More Than 750 mm |
Display Type | Digital |
Product Description:
Usage/Application | Milling Machine |
Material | Aluminium |
Display Row | 3 |
Brand | Electronica |
Operating Temperature | 0 Degree C to 45 Degree C |
Relative Humidity | 20% To 85% Non-Condensing |
Fuse Rating | 800mA Slow Blow 20mm |
Date Bits | 8 |
Communication Port | Com1 / Com2 |
Baud Rate /Bits Per Second | 9600 |
Stop Bits | 1 |
Net Weight | Approx 1 Kg |
Encoder Connector Type | 9-Pin D-Type Female |
Standard Compliance | EMC and Low Voltage Compliance BS EN 61326 RoHS |
Dimensions (mm) (*Excluding Earth Stud) | 152 X 267 X 82 Height X Width X *Depth |
Encoder Input | RS422 |
Encoder Resolution Supported | 0.1/0.2/0.5/1/2/5/10/20/50 Micron |
Power Consumption | 20 Watts Maximum |
Flow Control | None |
Quantization Error | +/- 1 Digit |
Details: